<div dir="ltr"><div class="gmail_extra"><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span class=""><br></span>
If you use an op-amp as buffer (filter output to + input, output to - input) such as TL-072 you won't have much drop to worry about.<br>
<br>
For pass-band you will have essentially no loading from the caps, and the op-amp will do nothing, so you will be close to unity gain then for the pass-band. It all depends on how the cut-off corner of the filter depends on the base frequency of the signal. If you think the loss will be a little too much, alter the feedback of the buffer op-amp to that of an amplifier with two resistors allows for the needed gain without making the design too complex.<br>
<br><br></blockquote><div>I'm assuming that the circuit would go something like this: output from PIC -> RC network chain -> Non-inverting amplifier -> 4066 switch matrix</div></div><br></div><div class="gmail_extra">I'm thinking the non-inverting amp since the resistors for the gain aren't dependent on the resistors involved in the filter networks. Unless of course I'm entirely wrong on how that works...</div></div>