<div dir="ltr"><div>By the way, slightly related, but not to PSU. I found some beautiful early transistors (2SC183) in the unit, made by NEC (Nippon) in a very peculiar package (I believe it's called TO-51). Unfortunately most of them died. Replacing them with 2N3904's works well. However, I was curious about how others feel about the sonic character of a divider organ architecture. Do you source specific transistors to maintain it's sound? I could not hear any audible differences between notes playing through working 2SC183's and 2N3904's, so in this case the organ seems fairly insensitive to transistor choice for it's oscillators and dividers.</div><div><br></div><div>Best,</div><div><br></div><div>Rutger</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Tue, Mar 7, 2017 at 2:19 PM, Rutger Vlek <span dir="ltr"><<a href="mailto:rutgervlek@gmail.com" target="_blank">rutgervlek@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>Hm, I like that idea of simplifying the PSU and making the expression pedal more durable. I already learned the unit can't work without the pedal, there's no normally closed contact that substitutes for the pedal in connecting audio to the output socket. I'll check if the 6V is wired as the schematics suggest.</div><span class="HOEnZb"><font color="#888888"><div><br></div><div>Rutger</div></font></span></div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><div class="gmail_quote">On Tue, Mar 7, 2017 at 1:54 PM, Roman Sowa <span dir="ltr"><<a href="mailto:modular@go2.pl" target="_blank">modular@go2.pl</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;padding-left:1ex;border-left-color:rgb(204,204,204);border-left-width:1px;border-left-style:solid">It looks like 6V is used only for the lamp in expression pedal that is used for photosensor.<br>
So replace it with good bright LED and skip the 6V part entirely.<br>
Or leave original lamp and fit inside the pedal any DC/DC converter to go down from 12 to 6V. But the lamp wil burn someday anyhow, so why not some slight upgrade now...<br>
<br>
You should better confirm that by following the cables if it's really just the pedal lamp.<br>
<br>
Roman<br>
<br>
W dniu 2017-03-07 o 13:27, Rutger Vlek pisze:<br>
<blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;padding-left:1ex;border-left-color:rgb(204,204,204);border-left-width:1px;border-left-style:solid"><span>
Good point Ingo!<br>
<br>
Towards the end of the service manual<br>
(<a href="http://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Yamaha-A-3-Service-Manual.pdf" target="_blank" rel="noreferrer">http://www.vintageshifi.com/r<wbr>epertoire-pdf/pdf/telecharge.p<wbr>hp?pdf=Yamaha-A-3-Service-Manu<wbr>al.pdf</a>)<br>
the PSU schematic is displayed. There's a full PSU diagram, and an<br>
overview diagram. The latter shows a straight coupling between both DC<br>
grounds of the 12V and 6V lines, however the first diagram does not!<br>
Confusing, I'll measure this in the actual unit to be sure.<br>
<br>
Assuming both grounds are connected, what you wrote is applicable here.<br>
So it means I'll have to start looking for a transformer with dual<br>
independent secondaries for 6.3V and 13V (or 12.6V). Anyone knows one?<br>
At least 7VA total.<br>
<br>
Regards,<br>
<br>
Rutger<br>
<br>
<br>
On Mon, Mar 6, 2017 at 6:06 PM, Ingo Debus <<a href="mailto:igg.debus@gmail.com" target="_blank">igg.debus@gmail.com</a><br></span><span>
<mailto:<a href="mailto:igg.debus@gmail.com" target="_blank">igg.debus@gmail.com</a>>> wrote:<br>
<br>
<br>
> Am 06.03.2017 um 14:00 schrieb Roman Sowa <<a href="mailto:modular@go2.pl" target="_blank">modular@go2.pl</a><br></span>
<mailto:<a href="mailto:modular@go2.pl" target="_blank">modular@go2.pl</a>>>:<span><br>
><br>
>><br>
>> Is there any harm in using the centre tap for the 6.3V and the<br>
end taps<br>
>> for the 12.6V supply to the PSU? It means the coil between one<br>
end and<br>
>> centre tap gets a little more loading than the other side. The same<br>
><br>
> No problem at all, just make sure that added load from 6V and 12V<br>
circuits doesn't exceed current rating for that winding.<br>
<br>
Careful. This won’t work if the two secondary windings of the<br>
original transformer are isolated from each other, and they are<br>
feeding two bridge rectifiers, and on the DC side of the bridge<br>
rectifiers the grounds are connected.<br>
<br>
With two half-wave rectifiers there’ll be no problem however.<br>
<br>
Ingo<br>
______________________________<wbr>_________________<br>
Synth-diy mailing list<br></span>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a> <mailto:<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.or<wbr>g</a>><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" target="_blank" rel="noreferrer">http://synth-diy.org/mailman/l<wbr>istinfo/synth-diy</a><br>
<<a href="http://synth-diy.org/mailman/listinfo/synth-diy" target="_blank" rel="noreferrer">http://synth-diy.org/mailman/<wbr>listinfo/synth-diy</a>><span><br>
<br>
<br>
<br>
<br>
______________________________<wbr>_________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" target="_blank" rel="noreferrer">http://synth-diy.org/mailman/l<wbr>istinfo/synth-diy</a><br>
<br>
</span></blockquote>
</blockquote></div><br></div>
</div></div></blockquote></div><br></div>