<html>
<head>
<meta content="text/html; charset=utf-8" http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<font face="Arial">Your comment about location of connector does not
work in all designs. For example, designs with a parallel mounted
main board will often have the connector running horizontal along
the bottom of the board instead of vertically up the side.<br>
<font face="Arial">There is a (poor) rule of thumb that says
'stripe to the bottom'<font face="Arial">. This is REALLY poor
and does account for boxed headers or incorrectly made cables
<font face="Arial">(</font>and YES there are 1000<font
face="Arial">'s </font></font>of cables out there that do
NOT use Pin 1 as the stripe<font face="Arial">!!!)</font><br>
If you boxed</font> headers then th<font face="Arial">e
statement "</font></font><font face="Arial"><font face="Arial">should
be oriented towards the bottom of a module" becomes academic as
you can only connect a IDC cable to a boxed header one way.<br>
</font></font>
<div class="moz-signature">
<meta http-equiv="content-type" content="text/html; charset=utf-8">
<br>
<div class="moz-signature">
<title></title>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
<p><font face="Arial, Helvetica, sans-serif" size="4">Best
Regards<br>
Laurie Biddulph<br>
Mobile: +61 0400 257 645<br>
Phone.: +61 02 4340 0938<br>
Web...: <a class="moz-txt-link-abbreviated" href="http://www.elby-designs.com">www.elby-designs.com</a><br>
Skype.: widgetoz </font> </p>
<p><font face="Arial, Helvetica, sans-serif" size="4">Elby
Designs<br>
9 Follan Close<br>
Kariong<br>
NSW 2250<br>
Australia</font></p>
<p><font face="Arial, Helvetica, sans-serif" size="4">ABN: 70
022 727 605</font></p>
<p align="center"><font face="Arial, Helvetica, sans-serif"
size="4"><img
src="cid:part1.4576A14B.92D8EC41@ozemail.com.au" alt=""
height="365" align="middle" width="437"></font></p>
<p align="center"><font face="Highlight LET" size="6"> Happy New
Year</font> <br>
</p>
<p align="left"><font face="Arial, Helvetica, sans-serif"
size="4"> <br>
</font> </p>
</div>
</div>
<div class="moz-cite-prefix">On 4/01/2017 9:48 AM, Vladimir Pantelic
wrote:<br>
</div>
<blockquote
cite="mid:c98d337c-2cc8-5ebc-b881-be7e8d14219a@gmail.com"
type="cite">On 03.01.2017 23:35, Jacob Watters wrote:
<br>
<blockquote type="cite">Thanks for all of the feedback so far.
Here are my notes:
<br>
<br>
Boxed Header
<br>
This is what I plan to use. Maybe my pin umbers are off. I was
going by the
<br>
image linked below. Is pin 1 on the bottom right in this image?
<br>
<br>
<a class="moz-txt-link-freetext" href="http://www.doepfer.de/a100_man/a100b_e.gif">http://www.doepfer.de/a100_man/a100b_e.gif</a>
<br>
</blockquote>
<br>
pins 1 and 2 of a 10/16 pin boxed/shrouded header are -12V and
should be oriented towards the bottom of a module. the actual
header will have a little triangle mark there, as will the IDC
connector that plugs into it - that's where you put the red stripe
of the ribbon cable.
<br>
<br>
_______________________________________________
<br>
Synth-diy mailing list
<br>
<a class="moz-txt-link-abbreviated" href="mailto:Synth-diy@synth-diy.org">Synth-diy@synth-diy.org</a>
<br>
<a class="moz-txt-link-freetext" href="http://synth-diy.org/mailman/listinfo/synth-diy">http://synth-diy.org/mailman/listinfo/synth-diy</a>
<br>
<br>
</blockquote>
<br>
</body>
</html>