<div dir="ltr">Use an incandescent lamp 100-150w in series (!) with the load. <br></div><div class="gmail_extra"><br><div class="gmail_quote">2016-10-11 11:58 GMT-03:00 Barry Klein <span dir="ltr"><<a href="mailto:barryklein@cox.net" target="_blank">barryklein@cox.net</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">What do you think the odds are that I'm going to have an issue?<br>
Say on a Memorymoog.  The damn thing has so many CMOS parts that croak for whatever reason.  Was it because the owner powered it up infrequently?<br>
Was it because of weak output caps in the supplies?  I tend to think the parts just crap out over time because of manufacturing process flaws. I tested the output caps with my LC102 on the memorymoogs (3) that I repaired and they were fine - the parts just went bad.  Otherwise, bad caps, use the synth multiple times you will just as likely see failures with a lot of use rather than after 5 years I would assume...<br>
Like on the Andromeda's I had been looking at recently - the CPU just seems to die and needs to be replaced.<br>
Have you really seen power supply faults in a pretest like you suggest? Without a load I wonder if the issues even show up.<br>
I guess I'll let you guys know the score after I try them all....<br>
<br>
Barry<br>
<br>
<br>
-----Original Message----- From: Michael E Caloroso<br>
Sent: Tuesday, October 11, 2016 7:17 PM<br>
To: Barry Klein<br>
Cc: <a href="mailto:synth-diy@dropmix.xs4all.nl" target="_blank">synth-diy@dropmix.xs4all.nl</a><span class=""><br>
Subject: Re: [sdiy] Advice?: Powering up a vintage keyboard after several years<br>
<br></span><span class="">
If it's any synth with CMOS or CEM or SSM ICs in it, verify the power<br>
supply FIRST.  If a rail is missing or over spec it can blow these<br>
things.  The last thing you want are blown CEM/SSM ICs.<br>
<br>
MC<br>
<br>
On 10/11/16, Barry Klein <<a href="mailto:barryklein@cox.net" target="_blank">barryklein@cox.net</a>> wrote:<br>
</span><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span class="">
Well, that’s me....<br>
If the consensus is just plug it in I’m good but if it is check the supplies<br>
first....  memorymoogs, prophet 5, lesser synths...  I’d just leave them off<br>
– don’t need the added grief right now.<br>
No way am I going to tweak up the memorymoog supplies and go through<br>
calibration of them again... at least not now.<br>
Maybe the Variac is just a thing for tube-based things like old ham sets or<br>
guitar amps?<br>
I have 2 (transistor(ized) ham tranceivers and a Drake receiver that I need<br>
to try too.<br>
<br>
<br>
Barry<br>
<br>
<br>
From: Jason Proctor<br>
Sent: Tuesday, October 11, 2016 6:35 PM<br>
To: David G Dixon<br>
Cc: Barry Klein ; synth-diy DIY<br>
Subject: Re: [sdiy] Advice?: Powering up a vintage keyboard after several<br>
years<br>
<br>
have someone who knows what they're doing check at least the PSU first?<br>
<br>
<br>
<br>
On Tue, Oct 11, 2016 at 6:25 PM, David G Dixon <<a href="mailto:dixon@mail.ubc.ca" target="_blank">dixon@mail.ubc.ca</a>> wrote:<br>
<br>
  Plug that shit in!<br>
<br>
<br>
<br></span>
------------------------------<wbr>------------------------------<wbr>----------------<span class=""><br>
    From: Synth-diy [mailto:<a href="mailto:synth-diy-bounces@dropmix.xs4all.nl" target="_blank">synth-diy-bounces@drop<wbr>mix.xs4all.nl</a>] On Behalf<br>
Of Barry Klein<br>
    Sent: Tuesday, October 11, 2016 5:14 AM<br>
    To: synth-diy DIY<br>
    Subject: [sdiy] Advice?: Powering up a vintage keyboard after several<br>
years<br>
<br>
<br>
    I am going through the stuff in my garage.  I have several vintage<br>
synths – some worth quite a bit now – and they haven’t been powered in at<br>
least 5 years.<br>
    What would you recommend – advancing on a Variac, or just plug it in?<br>
    Barry<br>
<br>
<br>
  ______________________________<wbr>_________________<br>
  Synth-diy mailing list<br>
  <a href="mailto:Synth-diy@dropmix.xs4all.nl" target="_blank">Synth-diy@dropmix.xs4all.nl</a><br>
  <a href="http://dropmix.xs4all.nl/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://dropmix.xs4all.nl/mailm<wbr>an/listinfo/synth-diy</a><br>
<br>
<br>
<br>
</span></blockquote><div class="HOEnZb"><div class="h5">
<br>
______________________________<wbr>_________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@dropmix.xs4all.nl" target="_blank">Synth-diy@dropmix.xs4all.nl</a><br>
<a href="http://dropmix.xs4all.nl/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://dropmix.xs4all.nl/mailm<wbr>an/listinfo/synth-diy</a><br>
</div></div></blockquote></div><br></div>