Hi guys,<div>I have to replace the DC HV filter capacitors on my Mesa head. They're 450V electrolytics running at maybe 420V and have a footprint of 12mm at the base. They dried out after ~6 years. I would like to replace them with good ones that have very low ESR in the audio range. This amp has a problem where gain stages leak to each other, and I suspect that happens through the HV bus. If need be I can use capacitors with a different footprint, I could build a scaffold since everything is TH.</div><div><br></div><div>Is there anything that would suggest against using MKT capacitors here?</div><div><br></div><div>I also thought about using pairs of large and small capacitor to compliment frequency response of impedance.</div><div><br></div><div>Links to suppliers or part #'s would be great.</div><div><br></div><div>Thanks</div>