<div dir="ltr"><div class="gmail_extra"><div class="gmail_quote">On 3 March 2016 at 21:17, Gordonjcp <span dir="ltr"><<a href="mailto:gordonjcp@gjcp.net" target="_blank">gordonjcp@gjcp.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Laser cutters aren't great at making PCBs</blockquote></div><br>Yeah I use the laser cutter for custom synth cases and many other things. No PCBs. One of my recent projects is a personalised backgammon set for a friend, in bamboo, and with thin viscose felt backing on both the board and the playing pieces. The felt can be lasercut as well, of course.</div><div class="gmail_extra"><br></div><div class="gmail_extra">But the same applies for both hobbyist PCB manufacture and laser-cutting projects, of course. You upload your design mistakes and it reproduces them reliably and quickly with minimal effort, then you fix some bugs and do it again. And you keep doing this because you get complacent and don't quite check each revision rigorously enough.</div><div class="gmail_extra"><br></div><div class="gmail_extra">John</div></div>