<p dir="ltr">Another capacitor question popped up:<br>
What's your view on having electrolytic caps right at the input of an audio device in order to block DC and/or protect the circuit?</p>
<p dir="ltr">I always have a smallish resistor and dual schottky diodes connected towards rails at the inputs, and I hope this will protect from most voltage spikes. Does a cap really add any protection here? The DC issue can be taken care of later in the signal chain, and avoiding input caps saves cost, space, and possibly audio quality.</p>
<p dir="ltr">/mr - with golden [tinitus shower] ears<br></p>
<p dir="ltr">Den 3 feb. 2016 8:01 em skrev "David G Dixon" <<a href="mailto:dixon@mail.ubc.ca">dixon@mail.ubc.ca</a>>:<br>
><br>
> I've read all these recapping posts with interest, but I gotta say, I avoid using electrolytic caps except for power rail decoupling purposes.  I never design them into actual circuits (and I've never built my own power supply).  Same with tants.</p>