The Akai SCSI fuse issue was due to them not putting a resettable fuse in the SCSI chain. What would happen is people would hot swap SCSI drives(which is a no-no)and blow the fuse. <div><br></div><div>From what I understand, the fuse issue doesn't apply to Zip drives because they don't use active termination. </div><div><br></div><div>I had this issue with an MPC3000 and it would not recognize a SCSI to CF drive. As soon as I swapped out the fuse it worked perfectly. </div><div><br></div><div>If the ASR can see and access the drive(even if only for 1.2% of a format) it might not be the fuse. </div><div><br></div><div>My gut reaction to this issue is to cut to the chase and get a CF solution from RaizinMonster or Lotharek. I'm really not comfortable trusting any data to a budget storage format that was questionable when it was new 15 years ago. </div><div><br></div><div><br><br>On Wednesday, December 2, 2015, ChristianH <<a href="mailto:chris@chrismusic.de">chris@chrismusic.de</a>> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">This reminds me of a problem that had been reported back in the late 90s<br>
on the AKAI mailing list. The AKAI samplers (I think S2000, but possibly<br>
others too) appear to have a fuse for termination power, which sometimes<br>
blows.<br>
<br>
I never had that problem myself, but reading "software setting" reminded<br>
me of that situation - it might well be that the software setting does<br>
not behave as intended because of something like that.<br>
<br>
If you have enough old SCSI stuff around, you may try putting the<br>
sampler *not* at the end of the chain, but use an additional external<br>
device (or one of those chunky terminator plugs) for termination.<br>
But, if the Ensoniq is like the AKAIs, this won't work. The AKAI has<br>
only one SCSI connector (and that's not even a real one, but a SUB-D 25<br>
instead), so that would require tinkering with a T-cable. No fun with<br>
SCSI, not to mention that reflections will be pretty uncontrollable. And<br>
termination is about reflections (or the lack of), after all...<br>
<br>
Chris<br>
<br>
<br>
<br>
On Wed, 2 Dec 2015 10:10:31 -0500 Travis Thatcher <<a href="javascript:;" onclick="_e(event, 'cvml', 'recompas@gmail.com')">recompas@gmail.com</a>><br>
wrote:<br>
<br>
> Thanks Brian,<br>
><br>
> Yeah its been quite some time since I had my MPC SCSI setup...like 16<br>
> years? The ASR-X does have internal termination and the zip drives<br>
> I've tested also have a switch on the back for termination on that end<br>
> as well. I'm just going with the sampler and drive so no intermediate<br>
> devices. My guess is that the ASR isn't actually terminating properly<br>
> - it is a software setting that seems to be set correctly.<br>
> Unfortunately the ASR doesn't have a second scsi port so I can just<br>
> stick on a terminator. I might try to open it up and test if the<br>
> actual termination is happening on the Ensoniq end. I'm also going to<br>
> try to stick a terminated scsi cd rom at the end of the chain tonight<br>
> to see if that helps.<br>
><br>
><br>
> On Wed, Dec 2, 2015 at 1:11 AM,  <<a href="javascript:;" onclick="_e(event, 'cvml', 'rsdio@audiobanshee.com')">rsdio@audiobanshee.com</a>> wrote:<br>
> > I forgot to mention that Ensoniq did not strictly use DOS formatting, at least not for the EPS. You can sometimes read an ENSONIQ floppy from DOS, but there is one extra sector per track, so the disk holds more data. Also, the format is entirely unlike DOS, so you need a special program to read the data.<br>
> ><br>
> > I wrote such a program for my NeXT Computer back in the days when my EPS saw daily use. That allowed any SCSI device (hard drive, floppy, Zip, etc) to be read in the Ensoniq format, and allowed transferring files between Ensoniq and other devices. But you can't read an EPS disk with standard formatting.<br>
> ><br>
> > I suspect that you have SCSI termination issues. Once you solve those, you should be able to format a disk so that the ASR-X can read it. If you get the Chicken Head software that others have mentioned, this should allow you to read Ensoniq disks from your PC.<br>
> ><br>
> > Brian<br>
> ><br>
> ><br>
> > On Dec 1, 2015, at 5:58 PM, Travis Thatcher <<a href="javascript:;" onclick="_e(event, 'cvml', 'recompas@gmail.com')">recompas@gmail.com</a>> wrote:<br>
> >> I've got a terminator and a scsi cd drive I can try on the end of the<br>
> >> chain tomorrow. I think it is weird that even if I insert a brand new<br>
> >> pc formatted zip disk the status still says 'Unreadable'. I thought<br>
> >> the ASR-X used DOS formatting... I may just give up in the end and get<br>
> >> an sd floppy emulator. I don't plan on putting huge samples on this<br>
> >> thing but it'd be nice to have the larger storage option.<br>
> >><br>
><br>
><br>
><br>
> --<br>
> <a href="http://www.travisthatcher.com" target="_blank">http://www.travisthatcher.com</a><br>
> <a href="http://www.soundcloud.com/thevoiceofsaturn" target="_blank">http://www.soundcloud.com/thevoiceofsaturn</a><br>
> _______________________________________________<br>
> Synth-diy mailing list<br>
> <a href="javascript:;" onclick="_e(event, 'cvml', 'Synth-diy@dropmix.xs4all.nl')">Synth-diy@dropmix.xs4all.nl</a><br>
> <a href="http://dropmix.xs4all.nl/mailman/listinfo/synth-diy" target="_blank">http://dropmix.xs4all.nl/mailman/listinfo/synth-diy</a><br>
<br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="javascript:;" onclick="_e(event, 'cvml', 'Synth-diy@dropmix.xs4all.nl')">Synth-diy@dropmix.xs4all.nl</a><br>
<a href="http://dropmix.xs4all.nl/mailman/listinfo/synth-diy" target="_blank">http://dropmix.xs4all.nl/mailman/listinfo/synth-diy</a><br>
</blockquote></div>