<div dir="ltr">Thanks David.  I noticed the crosstalk issue in a Module I was testing for production. Voltages in the buffer for the multiplexer was affecting the one for the CV input.  Our designer has since changed it to avoid the problem.<br></div><div class="gmail_extra"><br><div class="gmail_quote">On Sat, Nov 7, 2015 at 11:46 PM, David G Dixon <span dir="ltr"><<a href="mailto:dixon@mail.ubc.ca" target="_blank">dixon@mail.ubc.ca</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span class="">>> I don't get the issue with the power being on the "wrong side" as these<br>
chips are symmetrical, one could just turn it around and have the power pins<br>
facing the "right direction."  What I do worry about is interaction between<br>
opamps in the same package.  Depending on what you're doing it may indeed be<br>
better to use a few duals rather than quads.  In the real world, isolation<br>
between Opamps in the same package can be less ideal than the specs say.<br>
<br>
</span>The quad power pin thing is an annoyance, but a bloody needless one.  Why<br>
did they do it that way?  It just means all the quads need to be installed<br>
upside-down.<br>
<br>
The isolation thing is true.  "Crosstalk attenuation" for TL07X is rated at<br>
120dB.  It ain't!  At least not at 2000 Hz.  120dB should be dead silence.<br>
However, high-pitched squeals will happily slip from one opamp to another in<br>
a TL074.<br>
<br>
</blockquote></div><br><br clear="all"><br>-- <br><div class="gmail_signature">Quincas Moreira<br>Test Pilot at VBrazil Modular</div>
</div>