<p dir="ltr">It seems that Alcoswitch are not the only ones selling these knob mouldings, so someone else might sell them with smaller shaft fittings unless Alcoswitch already do.</p>
<p dir="ltr">Otherwise, +1 for the shaft reducers, I've used them together with Davies 1900 clone knobs when restoring an old Serge system that had lost several of its knobs on its petite shafts.</p>
<p dir="ltr">/Mr<br>
</p>
<div class="gmail_quote">Den 8 okt 2015 11:49 em skrev "Paul Schreiber" <<a href="mailto:synth1@airmail.net">synth1@airmail.net</a>>:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">PKES (S = skirted)<br>
<br>
Paul S.<br>
<br>
--- <a href="mailto:grant@musictechnologiesgroup.com">grant@musictechnologiesgroup.com</a> wrote:<br>
<br>
From: MTG <<a href="mailto:grant@musictechnologiesgroup.com">grant@musictechnologiesgroup.com</a>><br>
To: Pete Hartman <<a href="mailto:pete.hartman@gmail.com">pete.hartman@gmail.com</a>><br>
Cc: synthdiy diy <<a href="mailto:synth-diy@dropmix.xs4all.nl">synth-diy@dropmix.xs4all.nl</a>><br>
Subject: Re: [sdiy] I need your knob expertise<br>
Date: Thu, 08 Oct 2015 14:42:19 -0700<br>
<br>
Those look like they could be the Alcoswitch PKE series.<br>
<br>
<a href="http://www.jameco.com/Jameco/Products/ProdDS/551030.pdf" rel="noreferrer" target="_blank">http://www.jameco.com/Jameco/Products/ProdDS/551030.pdf</a><br>
<br>
<br>
<br>
On 10/8/2015 12:03 PM, Pete Hartman wrote:<br>
> I have these for exactly that purpose<br>
><br>
> <a href="http://elmegil.dynathome.net/~elmegil/IMG_20151008_135300299.jpg" rel="noreferrer" target="_blank">http://elmegil.dynathome.net/~elmegil/IMG_20151008_135300299.jpg</a><br>
> <a href="http://elmegil.dynathome.net/~elmegil/IMG_20151008_135242515.jpg" rel="noreferrer" target="_blank">http://elmegil.dynathome.net/~elmegil/IMG_20151008_135242515.jpg</a><br>
><br>
> Unfortunately they're in an unmarked bag, and I got them a long time<br>
> ago, so I couldn't tell you part numbers or suppliers.<br>
><br>
> If I needed more I'd probably search mouser for knob brass insert, limit<br>
> to 1/8" rather than 1/4" or common equivalents (e.g. 6mm) and see what<br>
> came up.  These particular ones also use a hex wrench for adjusting the<br>
> set screw rather than a standard jeweler's screwdriver.<br>
><br>
> These have the advantage of matching 99% of the rest of the knobs on my<br>
> 5U gear....<br>
><br>
> Thanks<br>
><br>
> Pete<br>
><br>
> On Thu, Oct 8, 2015 at 1:47 PM, MTG <<a href="mailto:grant@musictechnologiesgroup.com">grant@musictechnologiesgroup.com</a><br>
> <mailto:<a href="mailto:grant@musictechnologiesgroup.com">grant@musictechnologiesgroup.com</a>>> wrote:<br>
><br>
>     I'm looking for a relatively low profile knob for a rotary switch.<br>
>     1/8" diameter shaft. The switch does seems to require some force to<br>
>     turn, so knob diameter should not be tiny. I don't know for sure<br>
>     yet, but probably >= 1/2" in diameter and about the same in height?<br>
>     It's for a retrofit mod that will appear on the outside of some NOT<br>
>     rare vintage gear.<br>
><br>
>     Curiously I have zero knob stock,  =:-o  so rather than just buy a<br>
>     pile of stuff to test off eBay, I thought I should ask here first.<br>
><br>
>     I'm using a Grayhill 4 position rotary switch ($$$) because it seems<br>
>     to be the only thing I can find that will fit in small places.<br>
>     Anyway it has a 1/8" shaft with "a bit" of a flat spot.<br>
><br>
>     <a href="http://www.mouser.com/ds/2/626/Rotary_56-335299.pdf" rel="noreferrer" target="_blank">http://www.mouser.com/ds/2/626/Rotary_56-335299.pdf</a><br>
><br>
>     GB<br>
>     _______________________________________________<br>
>     Synth-diy mailing list<br>
>     <a href="mailto:Synth-diy@dropmix.xs4all.nl">Synth-diy@dropmix.xs4all.nl</a> <mailto:<a href="mailto:Synth-diy@dropmix.xs4all.nl">Synth-diy@dropmix.xs4all.nl</a>><br>
>     <a href="http://dropmix.xs4all.nl/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://dropmix.xs4all.nl/mailman/listinfo/synth-diy</a><br>
><br>
><br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@dropmix.xs4all.nl">Synth-diy@dropmix.xs4all.nl</a><br>
<a href="http://dropmix.xs4all.nl/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://dropmix.xs4all.nl/mailman/listinfo/synth-diy</a><br>
<br>
<br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@dropmix.xs4all.nl">Synth-diy@dropmix.xs4all.nl</a><br>
<a href="http://dropmix.xs4all.nl/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://dropmix.xs4all.nl/mailman/listinfo/synth-diy</a><br>
</blockquote></div>