<div dir="ltr"><div>Dan,</div><div><br></div><div>I suspect that the variable capacitor originally had a large pulley pressed on. Is the shaft splined? A knob with a small pulley would pull a cord that turned the big pulley on the capacitor. Often there was pointer attached to the cord that would move to display the frequency in Kilocycles.</div><div><br></div><div>You could make an adapter from the capacitor shaft diameter to 1/4 inch.<br><br>There are similar capacitors available with long 1/4 inch shafts.</div><div><br></div><div>John, WA7BSR</div><div>old radio guy  </div></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Oct 8, 2015 at 3:40 PM, Dan Snazelle <span dir="ltr"><<a href="mailto:subjectivity@hotmail.com" target="_blank">subjectivity@hotmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">I am working on a sdiyproject that uses an old fashioned variable capacitor (the kind with fins) to control an osc<br>
<br>
It does have a few holes to screw it into the bottom of a box<br>
<br>
BUT the shaft itself is not any sort of shaft I've worked with before AND the shaft is extremely short<br>
<br>
These are the three section type<br>
<br>
I figured maybe some of the fellow Ham sdiyers might be able to shed some light on mounting and creating longer shafts for these<br>
<br>
Many thanks for any advice<br>
<br>
<br>
<br>
Sent from my iPhone<br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@dropmix.xs4all.nl">Synth-diy@dropmix.xs4all.nl</a><br>
<a href="http://dropmix.xs4all.nl/mailman/listinfo/synth-diy" target="_blank" rel="noreferrer">http://dropmix.xs4all.nl/mailman/listinfo/synth-diy</a><br>
</blockquote></div><br></div>