On 10 September 2015 at 09:40,  <<a href="javascript:;" onclick="_e(event, 'cvml', 'eidorian@aladan.net')">eidorian@aladan.net</a>> wrote:<br>
> I just re-read the original post, and it might be that JP isn't asking how<br>
> he can get power from a MIDI cable, he might actually be asking a subtly<br>
> different question: how can he *send* more power over the two MIDI pins<br>
> (presumably without affecting the ability of those pins to transmit MIDI to<br>
> older devices at the same time).<br><br>The MIDI-DIN states that pin 2 should be connected, if nothing else, through the shield. Are there really cables around that have pin 2 completely unconnected?<br><br>
> But yeah, there's no fun to be had doing this.  Any device that requires<br>
> your "high powered" MIDI-out ports for power is going to damage your<br>
> "normal" gear if you ever plug it in accidentally :-(<br><br>I don't see how. A compliant, regular output device should have 220 ohm resistors in series on both pin 4 and 5 to limit the current and should handle even being indefinitely shorted. Likewise, a regular input device will have 220 ohm in series with the optocoupler. 5/220=23 mA and that's being really pessimistic and ignoring the LED forward voltage drop. <br>
<br>
--<br>
/Ove<br>
<br>
Blog: <<a href="http://blog.gg8.se/" target="_blank">http://blog.gg8.se/</a>><br>
<br>
"Here is Evergreen City. Evergreen is the color of green forever."<br>
<br><br>-- <br>/Ove<br><br>Blog: <<a href="http://blog.gg8.se/" target="_blank">http://blog.gg8.se/</a>><br><br>"Here is Evergreen City. Evergreen is the color of green forever."<br><br>