had it emitting noise, all over the place - through the air??<br><br>I just flipped on the power to my modular, to test out a new (to me) noise circuit from René Schmitz.<br>Hooking up the roughly 2' banana patch cable to a VCF input, I get a lower level white noise emitting all over the place. :O
<br>Even with the Cutoff on the Filter down all of the way, and the input to my VCA, down all of the way.<br><br>Another odd thing with it - the output level of the VCA, when it's between about 10AM and 2PM is when I hear the noise.  Outside of those settings on the VCA's output control - I hear nothing.
<br><br>???<br><br>Outside of hooking up the WN module's output with a shielded cable, I am STUMPED.  I've never had this happen before, with any other noise module, that I've hard working. :O<br><br>Any ideas??<br><br>If it would help any - I have 
0.1uF cap power supply filters all over the board, as well as 100uF and 22 ohm resistors, on the V+ and V- inputs to the entire board.<br clear="all"><br>Thanks for any possible info, on this one. :O :)<br>If it's not easy to fix - I could still keep it on the board, for a source to the Sample & Hold on the same PCB.  The noise is barely perceptible on the power lines, at 20mV.  Seeing that though - maybe I should apply cap filters to the PS inputs on the dual opamp, in the noise unit.
<br>Off to investigate. :)<br><br>-- <br>Take care,<br>Warmth and Peace,<br>Ryk<br><br><a href="http://deathlehem.bravehost.com/damian.html">http://deathlehem.bravehost.com/damian.html</a> - D.A.M.I.A.N.;s webpage - Jan. 0406 update