<div id="RTEContent">The trigger should be generated from the edge of the clock that advances<br>  the counter...  <br>  <br>  Some designs have a trigger that is generated with a switch on each<br>  output, so you can choose to trigger, or not... on each step.<br>  <br>  Any of the above is fairly easy...<br>  <br>  H^) harry<br><br><b><i>mark verbos <mverbos@earthlink.net></i></b> wrote:<blockquote class="replbq" style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;">  mult the trigger from the input?<br><br><br><br><br><br>Rykhaard D.A.M.I.A.N. wrote:<br>> Help! :(<br>> <br>> I've successfully got my 4 steps working, with a single 12 position (1 <br>> octave) rotary switch on each step.<br>> <br>> I'm now trying to derive a Gate or Trigger FROM each step when it <br>> occurs.  The best I've been able to do, is get a Trigger out to one of <br>> my envelope generators, when there's a larger than smaller trans!
 istion,
 <br>> between voltages from the Control Voltage out summer.  (Summing all of <br>> the rotary switch outputs to a single CV out, which itself is working <br>> perfectly.)<br>> <br>> As an example - say that I have the 4 notes set on the rotary switches to:<br>> <br>> C1 (lowest pitch)<br>> C2 (highest pitch)<br>> E1 (2nd lowest pitch)<br>> B1 (2nd highest pitch)<br>> <br>> I'm only getting Triggers, from the Highest and 2nd Highest pitch, due <br>> to the difference in voltage out of the CV summer.<br>> <br>> I've tried the following combinations on the comparator, that is setup <br>> with the following resistor divider on it's negative input:<br>> <br>> - +15V through 1M8 to negative input<br>> - Negative input through 15K to Ground<br>> <br>> On the positive input of the comparator, I've tried:<br>> <br>> - CV Out through 0.1uF to positive input; 1M to ground<br>> - CV Out through 0.1uF to positive in!
 put; 2M
 to ground<br>> - CV Out through 0.001uF to positive input; 1M to ground<br>> - CV Out through 0.01uF to positive input; 1M to ground<br>> - CV Out through 0.01uF to positive input; 200K to ground<br>> <br>> Almost all of them gave me the above description.  The worst (0.1 / 1M) <br>> gave me a Trigger on only the very highest voltage.<br>> <br>> What can I do, to get a new trigger, from every single step?  (All steps <br>> are coming from the 4051 1:8 multiplexer.)  Would I have to have a <br>> separate 4051, generating a Gate/Trigger, each time?  (That's my <br>> thoughts, now.  Which could be handy for more effects. :) )<br>> <br>> Thanks for any help. :)  At least 1 wav file'll be up at my webpage, as <br>> soon as I get a Gate or Trigger functioning properly. :)  (Then I'll get <br>> the 2nd rotary for each step done as well, so that I can alternate <br>> between each pair, on each step. :D )<br>> <br>> -- <br>> T!
 ake
 care,<br>> Warmth and Peace,<br>> Ryk<br>> <br>> http://deathlehem.bravehost.com/damian.html - D.A.M.I.A.N.;s webpage - <br>> Dec 2705 update<br></blockquote><br></div>