<div id="RTEContent">If you run on 0-15V and bias to 1/2V... it will still<br>  clip symmetrically, but to 0-15V.<br>  <br>  If some of the sound u like is comming from blasting<br>  the CMOS inputs... then you should stay where you are at.<br>  <br>  I can see no reason to not use the shottky diodes...<br>  <br>  H^) harry<br><br><b><i>Seb Francis <seb@burnit.co.uk></i></b> wrote:<blockquote class="replbq" style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;">  Harry Bissell Jr wrote:<br><br>> Just saw the schematic.<br>><br>> I would AC couple into the first opamp, bias the non-inverting input<br>> at 1/2Vcc and run the opamp on 0-15V (like a guitar stompbox). That<br>> would cure all your worries about exceeding the CMOS limits<br>> completely.<br>><br>Wouldn't this introduce non-symmetrical hard clipping since the TL072 <br>won't go down to negative rail voltage?  I will try it, but I'm really <br>happy with the !
 sounds I
 can get from the current circuit, so I'm still <br>leaning towards the schottky diode option.<br><br>Seb<br><br><br></blockquote><br></div>