high-voltage inverter must be placed carefully to avoid audio
interference.  Usually the inverter puts out an EM field that is
stronger along one axis than the others, so spacial orientation as well
as distance from audio lines is important.  You can get a rough
idea without special equipment by waving an ungrounded scope probe
around the inverter when it is running.<br>
 Actually as long as audio lines are shielded/grounded then most
of the problem is solved.  One possible solution for a modular
system would be to locate the inverter remotely in the main cabinet PSU
section, with a supply line running to the EL panel on the module in
question.  I am assuming that PSU layout in modular cabinets is
already intended to minimise power/audio interference.<br><span class="gmail_quote"></span><br>