I think I was the guy who mentioned 90VAC... mainly because that's
about what the inverter in the Moog Voyager puts out @ maximum. 
However I know that you can plug EL wire directly into a US wall socket
(110/120VAC @60Hz) -- it will be very bright...  basically EL stuff
runs on AC with a brightness proportional to voltage and a half-life
(loss of brightness over time) inversely proportional to the voltage
used.  That is, the brighter you run it the quicker it will decay,
losing brightness over time.  I have some vague memory of a half-life
of 10,000 hours at full brightness?  But I have nothing to back that
up.  I do know that if you run at half brightness it doubles the
half-life...  so it's a pretty direct relationship.  I reckon it's safe
to experiment, within reason.  If I understand correctly it's a coating
of phosphor on a conductive film, so... not much to break!<br>
<br>
I also remember that the AC is pulsed at ~300 Hz, and is nonsinusoidal (for efficiency, IIRC)<br>
here is a datasheet for a small EL driver IC with some useful info about typical voltage and frequency...<br>
<br>
<a href="http://www.rogerscorporation.com/durel/pdf/LIT-I9034A07.pdf">http://www.rogerscorporation.com/durel/pdf/LIT-I9034A07.pdf</a><br>
<br>
<br>
oh and pardon me, it's a coating of phosphor on an insulative film,
according to the informative article below... makes more sense now's I
think about it...<br>
<br>
<a href="http://www.edn.com/article/CA56670.html">http://www.edn.com/article/CA56670.html</a><br>
<br>
Google is my friend, I tell you... :-)<br>

<br>

-Amos<br><br><div><span class="gmail_quote">On 10/7/05, <b class="gmail_sendername">Tom Arnold</b> <<a href="mailto:xyzzy@sysabend.org">xyzzy@sysabend.org</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
On Fri, Oct 07, 2005 at 07:37:22AM -0700, Thomas Hudson wrote:<br>> I'm curious as to the specs on the inverters they use. Have you<br>> measured the output of the inverter? I think I saw somewhere that the<br>> EL needs 70VAC,
<br><br>Specs are very light on this stuff.  I havent yet measured one of the<br>supplied inverters but I've seen mention of 90vac.<br><br>Seems the inverter in my TG77 is toast.  I also tested the old EL sheet from<br>the 77 and yeah, its way way dim but I get no high pitch whine from the TG77
<br>inverter and of course no light.  I play some more tonight and I'll post<br>results.<br><br>--<br> -----------------------------------------------------------------<br> - Tom Arnold       -  Free Synth DIY webspace <a href="http://www.sdiy.org">
http://www.sdiy.org</a><br> - SynthGeek        -<br> - BBD Fanatic      -  "...is it a virus, a drug, or a religion?"<br> - echo evho wjxo   -    Juanita Shrugs. "What's the difference?"<br> --------------------
<br><br></blockquote></div><br>