I used this nice little single chip Sample and Hold circuit from Ray Wilson: <br>
<a href="http://www.musicfromouterspace.com/analogsynth/singlechipsampleandhold/singlechipsampleandhold.html">http://www.musicfromouterspace.com/analogsynth/singlechipsampleandhold/singlechipsampleandhold.html</a><br>
<br>
Then I modified my x0xb0x  (essentially a 303) to have a CV IN by
adding a jack and connecting the CV in to pin 5 of IC 11  (I did
not cut any traces so that my CV in is mixed with the CVs generated by
the sequencer.)  <br>
<br>
The schematic is here: <a href="http://www.ladyada.net/make/x0xb0x/files/mainboard_beta.png">http://www.ladyada.net/make/x0xb0x/files/mainboard_beta.png</a>  (look at the left side, middle)<br>
<br>
THe problem is that this totally messes up the tuning! My S&H circuit totally drops the tuning down several octaves. <br>
Should  I couple the CV from my circuit with a capacitor so that
the DC component of the CV is removed and then allI I am mixing in is
changes in voltages (modulation)????<br>
<br>
 I guess I am getting confused about how I mix CV's together....
this is easy if I am using opamps but I find I keep getting ocnfused by
the 303 circuitry and how they do things (sorry I am new to this!)<br>
<br>
any help is hugely appreciated! I built this box for a performance on saturday and I need to get it working!<br>
<br>
<br>
<br>
thanks,<br>
       Danjel<br>