HI,<br>
<br>
A group at MIT reverse enegineered a Roland TB-303 and sourced most of
the original transitors and components. They also added MIDI and USB
functionality and some other features. AT it's root is is still a 303,
the schematic even uses the same designations as the original 303 
(e.g. R110 of x0xb0x  = R110 of TB303).<br>
<br>
On the site are a few simple mods such as adding a pot to adjust slide
time, changing enevelop depths and increasing resonance...all of these
are failry basic.<br>
I have been interested to add some mods that will really allow me to
"mess" up sounds. I think the Devilfish Mod for the 303 had some great
ideas such as using the VCA output to modulate filter cutoff.<br>
How would I implement that?  I know I would probably be connecting
the VCA output via a 100K resistor and then a 0.47uF cap (so that only
audio frequencies are passed to the filter). Where would I connect it?
(I have included links to the schematic below). I would also want to
use a pot to control FM amount.<br>
<br>
Also, what are some other cool mods I could do? I was thinking of
having the VCO output feedback into it's CV input (like operator
feedback in FM synthesis) so that I could get a noise source. Again I
would control that feedback with a pot. <br>
<br>
Another idea I had was to put a small ring mod board in there and have
an external audio input be the modulator or perhaps put a small LFO
inside.<br>
<br>
Any other ideas?   I am new to this so the mroe details the better!<br>
<br>
<br>
<a href="http://web.media.mit.edu/~ladyada/make/x0xb0x/files/mainboard_beta.png">http://web.media.mit.edu/~ladyada/make/x0xb0x/files/mainboard_beta.png</a><br>
<br>
<a href="http://web.media.mit.edu/~ladyada/make/x0xb0x/index.html">http://web.media.mit.edu/~ladyada/make/x0xb0x/index.html</a><br>
<br>
<br>
thanks!<br>
<br>
<br>
Danjel<br>