Heh, I wish I could take a pic of my 'scope at the moment.  It is,
as I suspected, removing the 100k resistor from the feedback between
the second integrator and the summer that causes this.  By using
the same taps from the filter arrangement I get a nice square,
triangle, sine.  All with perfect symmetry and even gain, no DC
shift through their range, the sine in particular looks perfect. 
There seems to be an upper limit to the range short of 20k, perhaps as
low as 10k (my scope hasn't been calibrated since the early 90's at
best).   The lower limit is LOW, nice for a LFO.  There
is some clipping in the triangle and sine output above a given
frequency, trimming affects this, but doesn't cure it.  In any
case it seems I have a nice VCF/VC-LFO module now ;)  I have to
look into if I screwed up the original feedback path from the
schematic, the circuit was working with all filter responses before
discovering this, so I assume it was correct.  <br><br><div><span class="gmail_quote"></span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br></blockquote></div><br>