<HTML><BODY><DIV style='font-family: "Verdana"; font-size: 10pt;'><DIV>
<DIV>Hi </DIV>
<DIV>So we have a preliminary spec on the bus.</DIV>
<DIV>What for the first module? Maybe a <SPAN class=correction id="">vco</SPAN> core?</DIV>
<DIV>Is a <SPAN class=correction id="">asm-1</SPAN> style <SPAN class=correction id="">vco</SPAN> in thru-hole possible on</DIV>
<DIV>a <SPAN class=correction id="">simm</SPAN> stick form factor?</DIV>
<DIV> If memory serves does not the <SPAN class=correction id="">bergfotron</SPAN> <SPAN class=correction id="">squeeze</SPAN></DIV>
<DIV>4 asm-1 <SPAN class=correction id="">vcos</SPAN> on a 100mmx160mm <SPAN class=correction id="">pcb</SPAN>?</DIV>
<DIV><SPAN class=correction id="">Jeri</SPAN></DIV> <BR>-----Original Message-----<BR>From: harrybissell <harrybissell@prodigy.net><BR>To: Ken Stone <sasami@hotkey.net.au><BR><SPAN class=correction id="">Cc</SPAN>: Paul Maddox <P.Maddox@signal.<SPAN class=correction id="">QinetiQ</SPAN>.<SPAN class=correction id="">com</SPAN>>; synth-diy@dropmix.<SPAN class=correction id="">xs4all</SPAN>.<SPAN class=correction id="">nl</SPAN><BR>Sent: Wed, 11 May 2005 22:26:46 -0400<BR>Subject: Re: [<SPAN class=correction id="">sdiy</SPAN>] Module format<BR><BR>
<STYLE>
.AOLPlainTextBody {
margin: 0px;
font-family: Tahoma, Verdana, Arial, Sans-Serif;
font-size: 12px;
color: #000;
background-color: #fff;
}
.AOLPlainTextBody pre {
font-size: 9pt;
}
.AOLInlineAttachment {
margin: 10px;
}
.AOLAttachmentHeader {
border-bottom: 2px solid #E9EAEB;
background: #F9F9F9;
}
.AOLAttachmentHeader .Title {
font: 11px Tahoma;
font-weight: bold;
color: #666666;
background: #E9EAEB;
padding: 3px 0px 1px 10px;
}
.AOLAttachmentHeader .FieldLabel {
font: 11px Tahoma;
font-weight: bold;
color: #666666;
padding: 1px 10px 1px 9px;
}
.AOLAttachmentHeader .FieldValue {
font: 11px Tahoma;
color: #333333;
}
</STYLE>
<DIV class=AOLPlainTextBody id=AOLMsgPart_0_845451b5-613f-43bf-828e-f91dde7dc709><PRE><TT>Swap +5 and <SPAN class=correction id="">Dgnd</SPAN> to pins 1-2 and move everything down...
this will allow you to skip these more easily, and keep them at
the outer edge of the module is used... farther away from all
the 'good' signals :^P
H^) <SPAN class=correction id="">harry</SPAN>
Ken Stone wrote:
> >Grabbing the bull by the horns so to speak, how about this for pin use ;-
> >
> >1 = <SPAN class=correction id="">AGND</SPAN>
> >2 = +15V
> >3 = -15V
> >4 = <SPAN class=correction id="">AGND</SPAN>
> >5 = +5V
> >6 = <SPAN class=correction id="">DGND</SPAN>
> >7 - 12 = Audio In (+5V to -5V) Total of 6 audio inputs
> >13 = <SPAN class=correction id="">AGND</SPAN>
> >14 - 21 = <SPAN class=correction id="">CV</SPAN> In (+10v to -10v) Total of 8 <SPAN class=correction id="">CV</SPAN>/Gate inputs
> >22 = <SPAN class=correction id="">AGND</SPAN>
> >23 - 30 = Audio Out (+5V to -5V) Total of 8 Audio outputs
>
> You forget <SPAN class=correction id="">CV</SPAN> out, unless you intend to have <SPAN class=correction id="">ADSRs</SPAN>, <SPAN class=correction id="">LFOs</SPAN>, voltage processors
> etc using the Audio Out lines as well.
>
> Ken
> _______________________________________________________________________
> Ken Stone <A href="mailto:sasami%40hotkey.net.au">sasami@hotkey.net.au</A> or <A href="mailto:sasami%40cgs.synth.net">sasami@cgs.synth.net</A>
> Modular Synth <SPAN class=correction id="">PCBs</SPAN> for sale <<A href="http://www.blaze.net.au/~sasami/synth/" target=_blank>http://www.blaze.net.au/~sasami/synth/</A>>
> Australian Miniature Horses & Ponies <<A href="http://www.blaze.net.au/~sasami/" target=_blank>http://www.blaze.net.au/~sasami/</A>>
</TT></PRE></DIV><!-- end of AOLMsgPart_0_845451b5-613f-43bf-828e-f91dde7dc709 --></DIV></DIV></BODY></HTML>