<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META content="MSHTML 5.00.3013.2600" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Yes, if you are using the 9700 midi2CV. Just
connect the +/-15v supply </FONT></DIV>
<DIV><FONT face=Arial size=2>between D3 and R51 on the positive side. The
negative </FONT><FONT face=Arial size=2>side connect</FONT></DIV>
<DIV><FONT face=Arial size=2>between D4 and R52. Of course ground is
attached to point "G"</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Option: Remove the power switch and replace with a
normal open push button. </FONT></DIV>
<DIV><FONT face=Arial size=2>Connect </FONT><FONT face=Arial size=2>one leg
between C1 and R5. The other side connect to the +5V supply.</FONT></DIV>
<DIV><FONT face=Arial size=2>This is used to reset the 8031 microcontroller.
</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Have fun.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Jimbob</FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>> I have both PAIA VCF and
VCA. I want to run these from a +-15V power<BR>>supply. I am not an expert at
electronics it appears to me that both of<BR>>these modules use 12V
regulators at the power supply. My question to you<BR>>is can plug these
modules into a 15V power supply without
modification?<BR><BR>>--M<BR></DIV></FONT></BODY></HTML>