<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 5.5.2650.12">
<TITLE>RE: tips on soldersucking</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=2>> -----Original Message-----</FONT>
<BR><FONT SIZE=2>> > At 03:33 PM 4/13/00 -0400, mark scetta wrote:</FONT>
<BR><FONT SIZE=2>> > >how do y'all do your desoldering, without damaging components?</FONT>
<BR><FONT SIZE=2>> ></FONT>
<BR><FONT SIZE=2>> > I'm probably the only one to do this- as most of my work is </FONT>
<BR><FONT SIZE=2>> with larger,</FONT>
<BR><FONT SIZE=2>> > rather non-sensitive components, but I use compressed air- </FONT>
<BR><FONT SIZE=2>> I heat the</FONT>
<BR><FONT SIZE=2>> > solder and blow it out. By the time it hits something else, </FONT>
<BR><FONT SIZE=2>> it has cooled.</FONT>
<BR><FONT SIZE=2>> > ________</FONT>
<BR><FONT SIZE=2>> ></FONT>
<BR><FONT SIZE=2>> > Chris Bryant</FONT>
<BR><FONT SIZE=2>> > Bryant RV Services</FONT>
<BR><FONT SIZE=2>> > DeLand, Florida</FONT>
<BR><FONT SIZE=2>> > <A HREF="mailto:bryantrv@totcon.com">mailto:bryantrv@totcon.com</A></FONT>
<BR><FONT SIZE=2>> ></FONT>
<BR><FONT SIZE=2>> </FONT>
</P>
<P><FONT SIZE=2>Remember to where goggles if you're gonna blast it out - Ever get a solder blob in your eye? It hurts.</FONT>
</P>
<P><FONT SIZE=2>John Speth</FONT>
<BR><FONT SIZE=2>Molectron Detector, Inc.</FONT>
<BR><FONT SIZE=2><A HREF="http://www.molectron.com" TARGET="_blank">http://www.molectron.com</A></FONT>
<BR><FONT SIZE=2><A HREF="mailto:johns@molectron.com">mailto:johns@molectron.com</A> </FONT>
</P>
</BODY>
</HTML>