[sdiy] Looking for model:samples rubber buttons

[Ben Stuyts]

On 26 May 2026, at 12:46, Ingo Debus via Synth-diy <synth-diy at synth-diy.org> wrote:
> 
> 
>> Am 25.05.2026 um 22:44 schrieb Spiros Makris via Synth-diy <synth-diy at synth-diy.org>:
>> 
>> The button is made of rubber and is connected with the rest of the buttonboard with a membrane; this membrane broke and the button came right off.
>> Unfortunately this is not a single part, you need a new button set because all of them are connected that way, and their return action is thanks to this rubber membrane.
> 
> Could this possibly be 3D-printed, maybe with TPU? That material can be quite flexible.

Not with an FDM printer (filament). If you can get it to print, it won’t be pretty and consistent. Perhaps flex resin on a SLA printer would work. (Can always outsource this to a 3d-print service.)

Ben

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20260526/e897bcde/attachment.htm>