[sdiy] New TI 5532

[Mike Bryant]

  *
max supply voltage of 36V. The mixing board channels with +/- 22V won’t like that.


Neither would a 5532 !  That is 36V max as well.

I was R&D director at a well known British mixer company and we always used +/-17V tops on the output stages.  Those using higher voltages for line drivers usually use a pair of output transistors to drive the line.  I think my predecessor Douglas Self shows how best to do this in his book.

________________________________
From: mark verbos <markverbos at gmail.com>
Sent: 12 May 2026 11:13
To: Mike Bryant <mbryant at futurehorizons.com>
Cc: Sean Ellis <tensiontype at hotmail.com>; Synth-diy Mailing List <synth-diy at synth-diy.org>
Subject: Re: [sdiy] New TI 5532



On May 7, 2026, at 18:27, Mike Bryant <mbryant at futurehorizons.com> wrote:

Would have been better if they'd just said use the OPA1678 which is moreorless drop-in for SMT versions.



max supply voltage of 36V. The mixing board channels with +/- 22V won’t like that.
maybe maybe not a problem for you.


Mark







There are several Chinese suppliers of real 5532 clones in DIP-8 if you need them.  The ones from COSINE are definitely drop in if you're worried.  Haven't tried the other suppliers.


________________________________
From: Synth-diy <synth-diy-bounces at synth-diy.org<mailto:synth-diy-bounces at synth-diy.org>> on behalf of Sean Ellis via Synth-diy <synth-diy at synth-diy.org<mailto:synth-diy at synth-diy.org>>
Sent: 07 May 2026 14:36
Cc: Synth-diy Mailing List <synth-diy at synth-diy.org<mailto:synth-diy at synth-diy.org>>
Subject: [sdiy] New TI 5532

Just saw this thread, not sure if it was shared here. https://groupdiy.com/threads/the-new-ti-5532-chips-are-not-5532s-weve-used-for-decades.93707/
________________________________________________________
This is the Synth-diy mailing list
Submit email to: Synth-diy at synth-diy.org<mailto:Synth-diy at synth-diy.org>
View archive at: https://synth-diy.org/pipermail/synth-diy/
Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
Selling or trading? Use marketplace at synth-diy.org<mailto:marketplace at synth-diy.org>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20260512/4118ef7b/attachment.htm>