[sdiy] New TI 5532

[Mike Bryant]

The 5532's output drive isn't actually specified - there's not a single number or graph in the datasheet.  As designers we've just always known what it does so well.

But yes I've always found the 1678 is just as good as output current vs voltage is specified at a similar cost.

And if you need belt and braces then the TLV9362 exceeds every 5532 parameter significantly at about twice the price.
________________________________
From: rrsounds <rrsounds at aol.com>
Sent: 08 May 2026 10:03
To: Mike Bryant <mbryant at futurehorizons.com>
Cc: Sean Ellis <tensiontype at hotmail.com>; Synth-diy Mailing List <synth-diy at synth-diy.org>
Subject: Re: [sdiy] New TI 5532

But does it have the 5532’s output drive capability? Not very many replacements have a similar spec.

David Reaves
David Reaves Audio, LLC

Sent from my iPad

> On May 7, 2026, at 6:31 PM, Mike Bryant <mbryant at futurehorizons.com> wrote:
>
> Would have been better if they'd just said use the OPA1678 which is moreorless drop-in for SMT versions.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20260508/2034001b/attachment.htm>