[sdiy] Installing good looking XLR panel connector on rack equipment?

[Tony Mowbray]

Slow and steady is the best process. If you don't feel benevolent towards it, wait until later. Excellent work can be done without the fancy tool (and sometimes they cost quite a few dollars) just how slow and steadyRegardsTony MowbraySent from my Samsung Galaxy smartphone.
-------- Original message --------From: "Chromatest J. Pantsmaker via Synth-diy" <synth-diy at synth-diy.org> Date: 16/6/26  9:20 am  (GMT+10:00) To: synth-diy at synth-diy.org Subject: Re: [sdiy] Installing good looking XLR panel connector on rack
  equipment? I've done pretty well using a step drill and a small file.  You definitely want to punch the exact center of the XLR though.On Monday, June 15th, 2026 at 4:04 PM, Tom Bugs via Synth-diy <synth-diy at synth-diy.org> wrote:> I've used a few Q Max punches of various diameters - they're very good.> > > On 15/06/2026 23:16, cheater cheater via Synth-diy wrote:> > I won't be replacing the TRS socket, I'll be putting the XLR in an empty space.> >> > Thanks for the product suggestions so far, I'll check them out.> >> > On Mon, Jun 15, 2026 at 9:26 PM BrightBoy via Synth-diy> > <synth-diy at synth-diy.org> wrote:> >> In the USA, Greenlee has been the defacto chassis punch manufacturer since the industrial age started.> >>> >>> >>> >> I also recommend getting the stout automatic center punch to make sure your drill doesn't walk> >> on the mounting holes.> >>> >>> >>> >> My favorite? The heavy duty Starrett #18C> >>> >>> >>> >> Good luck!> >>> >>> >>> >> BB> >>> >>> >>> >>> >>> >> -----Original Message-----> >> From: Mike Bryant <mbryant at futurehorizons.com>> >> Sent: Jun 15, 2026 3:12 PM> >> To: synth-diy <synth-diy at synth-diy.org>, cheater cheater <cheater00social at gmail.com>> >> Subject: Re: [sdiy] Installing good looking XLR panel connector on rack equipment?> >>> >>> >>> >> Lots of punches available, but the problem for you will be making something of the exact diameter of the TRS socket to centralise the punch.  Then make up a template to punch the mounting holes.> >> ________________________________> >> From: Synth-diy <synth-diy-bounces at synth-diy.org> on behalf of cheater cheater via Synth-diy <synth-diy at synth-diy.org>> >> Sent: 15 June 2026 19:45> >> To: synth-diy <synth-diy at synth-diy.org>> >> Subject: [sdiy] Installing good looking XLR panel connector on rack equipment?> >>> >> I have a couple dbx 286s units, and in their infinite wisdom dbx did> >> not include XLR output, only input, so I'm looking for a good clean> >> way to install a high quality xlr output plug. It already has balanced> >> TRS, so electrically it isn't anything spectacular, but I'm looking to> >> punch the enclosure in a nice way and then install the plug. I was> >> wondering if anyone had experience with this, and can recommend a good> >> combination of panel mount XLR jack and a punch that makes holes that> >> fit it well. I know Neutrik do panel mount XLR, so that would be my> >> go-to, but I don't know how best to go about doing the hole punching,> >> so I would appreciate any suggestions or experiences. Thanks.> >> ________________________________________________________> >> This is the Synth-diy mailing list> >> Submit email to: Synth-diy at synth-diy.org> >> View archive at: https://synth-diy.org/pipermail/synth-diy/> >> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy> >> Selling or trading? Use marketplace at synth-diy.org> >> ________________________________________________________> >> This is the Synth-diy mailing list> >> Submit email to: Synth-diy at synth-diy.org> >> View archive at: https://synth-diy.org/pipermail/synth-diy/> >> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy> >> Selling or trading? Use marketplace at synth-diy.org> > ________________________________________________________> > This is the Synth-diy mailing list> > Submit email to: Synth-diy at synth-diy.org> > View archive at: https://synth-diy.org/pipermail/synth-diy/> > Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy> > Selling or trading? Use marketplace at synth-diy.org> > --> BugBrand LTD> UK company No. 07199808> VAT No. GB 988 2629 57> 1 Ninetree Hill> BRISTOL BS1 3SB> United Kingdom> www.bugbrand.co.uk> > ________________________________________________________> This is the Synth-diy mailing list> Submit email to: Synth-diy at synth-diy.org> View archive at: https://synth-diy.org/pipermail/synth-diy/> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy> Selling or trading? Use marketplace at synth-diy.org> ________________________________________________________This is the Synth-diy mailing listSubmit email to: Synth-diy at synth-diy.orgView archive at: https://synth-diy.org/pipermail/synth-diy/Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diySelling or trading? Use marketplace at synth-diy.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20260616/478774e4/attachment.htm>