[sdiy] 3U Eurorack modules in a 1U rack

[cheater cheater]

i'm lost... you have 2U available.. but need 50U of those things?

Are you saying you have 2U available in 25 separate racks? how many
racks do you have lol

On Wed, Jul 29, 2026 at 2:35 AM Mike Bryant <mbryant at futurehorizons.com> wrote:
>
> Okay slight problem is they are in Kent ... USA !   But gives me the idea of just making a new single 19" front panel and removing the panels from the modules and screwing them to this which will be the tidiest solution I think.
> ________________________________
> From: brianw <brianw at audiobanshee.com>
> Sent: 28 July 2026 22:34
> To: Mike Bryant <mbryant at futurehorizons.com>
> Cc: synth-diy at synth-diy.org <synth-diy at synth-diy.org>
> Subject: Re: [sdiy] 3U Eurorack modules in a 1U rack
>
> Hi Mike,
>
> They're not exactly off-the-shelf, but Front Panel Express is a good place for medium runs like this. They even have some angle brackets that you might be able to use to secure the Eurorack modules to the bottom panel and top panel, so that they are not floating.
>
> I have designed plenty of blank Eurorack panels (with custom engraved text) as well as face plates for my own custom Eurorack modules. Front Panel Express is great for this, and they also have some options for building an entire rack enclosure based on modular components.
>
> I have not used their full enclosure products, but I recently watched a video showing how they reinforce the long 1U face plate with those angle brackets to the top and bottom panels to prevent flexing. I'm thinking those could also be used to secure 3 Eurorack modules (with 12 brackets in total). You could also custom-design the back panel to allow providing Eurorack power as well as audio inputs and outputs.
>
> Again, this is not off-the-shelf, and it requires some design work, but the fabrication part is automated and precise. I suppose FPE can get expensive at quantities like 50, because they're more for one-off prototypes, but they also have somewhat of a discount for quantity.
>
> Brian
>
>
> On Jul 28, 2026, at 12:01 PM, Mike Bryant <mbryant at futurehorizons.com> wrote:
> > Yes but I actually need quite a lot of them - about 50 so was hoping there was something off the shelf.
> >
> > On Tue, Jul 28, 2026 at 8:24 PM Mike Bryant <mbryant at futurehorizons.com> wrote:
> > > Does anyone know of any pre-built metalwork to allow 3 3U Eurorack modules of up to 8HP to be securely mounted horizontally side by side across the width of a 1U rack unit ?
> > >
> > > Yes I know the labels will all be on their sides, but not a problem.
>
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org