[sdiy] 3U Eurorack modules in a 1U rack

[cheater cheater]

if you need 50 of em, why not buy eurorack 3U mounts? then you can
just buy like 17 of those and you're done. they are readily available.
and no need to rotate things 90 degrees either.

On Tue, Jul 28, 2026 at 10:26 PM cheater cheater
<cheater00social at gmail.com> wrote:
>
> just obviously first order it made out of some cheap material to check
> fitment...
>
> On Tue, Jul 28, 2026 at 10:26 PM cheater cheater
> <cheater00social at gmail.com> wrote:
> >
> > at such volumes it's worth ordering it cut with laser or water jet. or cnc.
> >
> > On Tue, Jul 28, 2026 at 9:02 PM Mike Bryant <mbryant at futurehorizons.com> wrote:
> > >
> > > 3D printing wouldn't ground the units so would have to mess around with green wires 🙁
> > >
> > > ________________________________
> > > From: H.Sergio Alves <theatomlabspt at gmail.com>
> > > Sent: 28 July 2026 19:49
> > > To: cheater cheater <cheater00social at gmail.com>
> > > Cc: Mike Bryant <mbryant at futurehorizons.com>; synth-diy at synth-diy.org <synth-diy at synth-diy.org>
> > > Subject: Re: [sdiy] 3U Eurorack modules in a 1U rack
> > >
> > > 3D printing to the rescue :)
> > >
> > > On Tue, 28 Jul 2026 at 19:48, cheater cheater via Synth-diy <synth-diy at synth-diy.org> wrote:
> > >
> > > no, but I've recently thought about this, and it seems like you should
> > > be able to set this up with just "joiner" brackets. I suggest getting
> > > some L brackets for that purpose, and just join the modules back to
> > > back (or top to bottom). then at the extremes, you'd have to make some
> > > plates to extend the three modules to the width of a 19" rack's
> > > mounting holes. That's not really difficult and you should be able to
> > > do a good job of it with a hand drill.
> > >
> > > On Tue, Jul 28, 2026 at 8:24 PM Mike Bryant <mbryant at futurehorizons.com> wrote:
> > > >
> > > > Does anyone know of any pre-built metalwork to allow 3 3U Eurorack modules of up to 8HP to be securely mounted horizontally side by side across the width of a 1U rack unit ?
> > > >
> > > > Yes I know the labels will all be on their sides, but not a problem.
> > > > ________________________________________________________
> > > > This is the Synth-diy mailing list
> > > > Submit email to: Synth-diy at synth-diy.org
> > > > View archive at: https://synth-diy.org/pipermail/synth-diy/
> > > > Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> > > > Selling or trading? Use marketplace at synth-diy.org
> > >
> > > ________________________________________________________
> > > This is the Synth-diy mailing list
> > > Submit email to: Synth-diy at synth-diy.org
> > > View archive at: https://synth-diy.org/pipermail/synth-diy/
> > > Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> > > Selling or trading? Use marketplace at synth-diy.org