[sdiy] probes, clips, and clamps recommendations?

[grenert]

I bit the bullet years ago to shell out for this set, and it has been worth
every penny. There are something like 5 different types of clip for pretty
much anything you would want to grab.
https://probemaster.com/9104-electronic-deluxe-test-lead-kit/

For probing a dense PCB (like SMD), these are nice.  The probes themselves
are smaller than ususal, with spring-loaded pogo tips to keep probing if
your probing lets up a bit.
https://www.testequity.com/product/35704-1-6342

If you have the patience for ebay, I think the old Tektronix P6139 is the
best probe I've ever used. Small, durable, flexible cable.  Hold out for a
complete set with all of the accessories (clips, hook, short ground, etc).

Best,
J. P.


On Fri, Jul 24, 2026, 7:10 AM Chris McDowell via Synth-diy <
synth-diy at synth-diy.org> wrote:

>
> This came up in another thread but l wanna ask the list directly: what
> kinds of probes / clips / clamps tooling are folks here enjoying and would
> recommend?
>
> I have normal scope probes and normal meter probes. they're anywhere from
> fine to bad, and I'm always striking precarious poses to get signals I'm
> interested captured on the scope.
>
> I'm reading about PCBite and tag connect as two examples of "hey this
> could suck less". Anyone have other favorites or experience with these?
>
> I'm ready to spend a little bit to improve my day to day "let's see what
> this little fellow is up to" experience.
>
> Cheers,
> Chris McDowell
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20260724/37b27ddf/attachment.htm>