[sdiy] Casio XW-PD1 nonsense

[Jacob Watters]

It sounds like it might be behaving like a Yamaha DJX. That synth will
respond to all midi channels all the time, but just use the GM sounds for
each channel. To get it to use the sound that you select, you have to set
the midi RX channel. Then the channel you set will play the selected sound,
and every other channel will still play the GM sounds. You can't use it in
a daisy chain.

*Jacob Watters*
JacobWatters.com <http://jacobwatters.com/>


On Thu, Jan 29, 2026 at 9:20 AM Adam (synthDIY) <synthdiy at adambaby.com>
wrote:

> Great post Benjamin
>
> that is gold...  you can tell just how excited they were when they came up
> with that circular 1 bar write-logic...
>
> [image: maxresdefault.jpeg]
>
> Trackformer XW-PD1 Introduction <https://youtu.be/M3GDyZsmUhM>
> youtu.be <https://youtu.be/M3GDyZsmUhM>
> <https://youtu.be/M3GDyZsmUhM>
>
>
> I suppose, like so many instruments, once a certain amount of the "muscle
> memory" becomes second-nature, that's when you can start to stretch the
> possibilities...
> but still... (shudder)...
>
>
> A
>
>
> On 29 Jan 2026, at 23:35, Benjamin Tremblay via Synth-diy <
> synth-diy at synth-diy.org> wrote:
>
> Hi, just asking in case anyone knows about how to get sampled sound to
> play via external MIDI controller.
>
> I got this Casio “trackformer” thing in hopes I could trigger its sounds
> with MIDI.
> I added 5-pin MIDI to it and it works.
>
> However, its MIDI implementation is sketchy. Very little is written about
> this thing. I know it neither sends nor receives MIDI clock or SPP.
> I don’t care. What I care is if I can trigger XW-PD1 sounds with an
> external device.
> It seems like it sort of works, but basically I can only trigger ROMpler
> sounds, not the “XW Synth” mono synth, and not a “bank” with custom sampled
> sounds assigned to pads.
> In other words it can trigger “general MIDI / XG” sounds but it cannot
> trigger “pads” with the settings I assign to them.
> I will re-read the MIDI implementation page, but I get the feeling that
> both the MIDI implementation and a dump of MIDI output will not reveal
> anything about how it works.
> I do not think I can select a program/bank that is “custom” content via
> MIDI. I admit I don’t understand if I can even address sampled sound by
> bank/patten/pad type/ pad in midi at all.
>
> I can get it to play a bank with a sample if the bank is a polyphonic
> voice of just one sample. However, if I send a MIDI program change to that
> channel I can never get that sound back unless I reboot.
> I cannot select a drum kit where I added custom samples to the kit. It
> only plays the default sounds of the kit, as if when I added a sample I was
> simply “covering” the native sound with sample via some kind of internal
> mapping that is only driven by hitting a pad.
>
> So, it seems, the XW-PD1 is a sports car red spaceship that when played by
> an external sequencer, sounds like a multitimbral home keyboard from the
> mid 2000s. Granted it has some decent synth sounds and a 909 kit.
>
> I can only imagine what it was like to work on this product. Let me guess.
> A product spec that was written and then abandoned.
> An internal team that did the microcontroller and UI coding.
> A DSP team that included consultants who programmed the Dream chip and did
> the bare minimum amount of work to take a “tone module demo” repo and make
> it handle the samples and effect pads.
> The Dream chip is controlled by a TTL level MIDI pin, and the DSP team
> pushed back on any feature request that required anything but standard MIDI
> commands, saying it was “impossible”.
>
> Benjamin Tremblay
> btremblay at me.com
> Carlisle, MA 01741
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
>
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20260129/e53a4167/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: maxresdefault.jpeg
Type: image/jpeg
Size: 61718 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20260129/e53a4167/attachment.jpeg>