[sdiy] Retractable mini pots

[Ben Stuyts]

I don’t know which value you need, but I see some stock here for example:
https://www.digikey.nl/nl/products/detail/alps-alpine/RK097111T065/21721640
https://eu.mouser.com/en/ProductDetail/Alps-Alpine/RK097111T065?qs=Xb8IjHhkxj4JHT8JECv%2F7A%3D%3D

Ben

> On 21 Aug 2026, at 21:43, Dixon, David <david.dixon at ubc.ca> wrote:
> 
> Presumably you are correct.
> 
> Is anything like that available for purchase in 2026?
> 
>> On Aug 21, 2026, at 12:34 PM, Ben Stuyts <ben at stuyts.nl <mailto:ben at stuyts.nl>> wrote:
>> 
>> [CAUTION: Non-UBC Email]
>> Hi Dave,
>> 
>> Maybe something like this? https://tech.alpsalpine.com/e/products/detail/RK097111T065
>> 
>> Ben
>> 
>>> On 21 Aug 2026, at 20:28, Dixon, David via Synth-diy <synth-diy at synth-diy.org <mailto:synth-diy at synth-diy.org>> wrote:
>>> 
>>> Hello Synth DIY Team,
>>> 
>>> As many of you probably know, I am building my own version of the Korg PS-3100.  (Here’s a fairly cringe video of the core in action, with a lot of extra info about the board layouts, etc — https://www.youtube.com/watch?v=lbtxMdQE64A) I’ve got the core circuitry (48 separate synthesizers) and much of the downstream circuitry (resonators, etc) designed, built and tested, and I am currently trying to lay out the panel.
>>> 
>>> I am going to also have the 12 mini pots down the left side for “TEMPERAMENT ADJUST” (which I presume was basically a way to adjust the tuning without opening the case and adjusting trimmers).  The original had these nifty retractable mini pots that can be pushed in flush the panel when not being used.  I cannot seem to find anything similar on the internet.  I was wondering if any of you had any inside track into where one might be able to procure such a thing.  I need a dozen of them, and I’d prefer if they were PCB mount, but that’s not strictly necessary.
>>> 
>>> Thanks in advance,
>>> Dave Dixon
>>> ________________________________________________________
>>> This is the Synth-diy mailing list
>>> Submit email to: Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
>>> View archive at: https://synth-diy.org/pipermail/synth-diy/
>>> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
>>> Selling or trading? Use marketplace at synth-diy.org <mailto:marketplace at synth-diy.org>
>> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20260821/0e9fd77a/attachment.htm>