[sdiy] Kawai sx210 issues

[Mike Bryant]

I think you need to get a scope on the power rails.  TL082s rarely go down so I suspect the power supply is putting out spikes or something way over the voltage they can handle.
________________________________
From: Synth-diy <synth-diy-bounces at synth-diy.org> on behalf of Dan Weal via Synth-diy <synth-diy at synth-diy.org>
Sent: 22 March 2025 16:34
To: synth-diy at synth-diy.org <synth-diy at synth-diy.org>
Subject: [sdiy] Kawai sx210 issues


Hi all,

Was really hoping someone can help.

I previously mentioned replacing the diode rectifiers in the psu due to them getting hot.

But it transpires there looks to be a problem with the 5v rail causing it to get hot.

I have Checked both cpu and voice board but I can’t find any issues.

Would anyone know what resistance is ohms I should be getting from the +15 and -15v rail. When I check I am getting 650 ohms. Is that right???

It’s weird because the synth was working then suddenly a few tl082 s went down I replaced them then it keep blowing the psu fuses.

Thanks all.

Best regards,

Dan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20250322/12aac05d/attachment.htm>