[sdiy] Dual Matched N JFET from Linear

[René Schmitz]

On 21.06.2025 22:18, Mike Bryant wrote:
> One place you do see FETs quite a lot is the muting output of mixers - 
> they kill thumps well without distorting the output signal.


Sure, signal switching (off in this case). Where circuits tend to be 
relatively insensitive to the unit variations.

I was thinking more about amplification where the DC offset and matching 
specs can come into play. Which might require a tightly matched pair.


Cheers,

  René


>
>
> ------------------------------------------------------------------------
>
> On 2025-06-21 12:53, René Schmitz wrote:
> > FETs have large unit to unit variations, good for one-off hobbyist or
> > space mission work, but
> > annoying to show-stopper for mass production. So you'll not see them
> > that often in the wild.
>
>
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to:Synth-diy at synth-diy.org
> View archive at:https://synth-diy.org/pipermail/synth-diy/
> Check your settings at:https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Usemarketplace at synth-diy.org


-- 
--
synth at schmitzbits.de
http://schmitzbits.de
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20250622/0aecae5e/attachment.htm>