[sdiy] Mitxela combined knob & socket

[Mattias Rickardsson]

On Wed, 11 Jun 2025 at 20:30, Donald Tillman <don at till.com> wrote:

> >
> > This is just great: https://youtu.be/dLw2QQdOLaM
>
> 4-1/2 minutes of Jazz Hands.  That's so weird.
>

Definitely some of the internet's least significant bits.  :-D


> So what he needs to do is to mount the magnet on a regular patch cable
> plug, and set up his Hall Effect sensor to detect the rotation of the plug
> in the socket, and that way you could rotate the plug to adjust the signal
> level.  How's that for cringe?


Good, thanks. There are lots of good possibilities!
How about if the parameter value would be set by the plug rotation, and the
input sensitivity set by how far the plug goes into the jack?
Or somehow using patch cords that can stretch, passing less signal when
stretched more? Pluck it for some modulation.

/mr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20250611/a3cffa31/attachment.htm>