[sdiy] Alfa AS3350 power supply question

[David G Dixon]

Thanks for all the hot tips.

It turns out that the power supply I intend to use has a '723, so it is
easily adjustable to 12V.  Since the rest of my circuit is not fussy, I will
simply alter the supply down to +/-12V and be done with it.  It may be as
simple as tweaking a trimpot or two, or, at most, changing a resistor or
two.

In other news, I just laid out a test board for a dual SVF using the '3350,
and the pinout on that device could have been more logical.