[sdiy] Datasheet Toshiba TA7505M / modern replacement

[Roman]

TA7505 is much slower than TL072, and even then that cannot affect tuning range. There must be something shorted in connections between the boards probably. Or maybe the fault was there before you made SSK replacement.
As long as your replcement provides proper tuning voltage, it's good.

Roman 

---- Użytkownik Pete Hartman via Synth-diy napisał ----

>In the absence of the datasheet, I'd consider trying a "better" op amp than
>the TL072, maybe an LT1013 or OPA2134, if I had them on hand (I personally
>do :) ).  Obviously the datasheet to get the actual details would be
>preferable....
>
>On Sat, Jan 4, 2025 at 9:31 AM Florian Anwander <fanwander at mnet-online.de>
>wrote:
>
>> Hello,
>>
>> I built a replacement for the SSK board in a Yamaha CS15, essentially
>> using Old Crow's approach. My schematic is here:
>> https://florian-anwander.de/yamaha_cs15/CS15_SSK_FA__Nano_2_sch.png
>> The original schematic is here:
>> https://florian-anwander.de/yamaha_cs15/Yamaha_CS-15_Servicemanual.pdf
>>
>> Everything works perfectly. Only after switching on, VCO2 plays in an
>> extremely wide range, while VCO1 only plays over one octave across the
>> entire keyboard. I can "cure" this by briefly interrupting the CV
>> connection to VCO1.
>>
>> The difference between the two VCOs is that the TA7505M OpAmp, which
>> provides the buffering for the portamento circuit, is connected directly to
>> the IG00153 of VCO1; while for VCO2 there is an additional OpAmp stage
>> before the IG00153 that provides the detune voltage. In my circuit I use a
>> TL072 instead of the Toshiba TA7505M.
>>
>> Now I am looking for the datasheet of the TA7505M to find out what could
>> cause the problem. There doesn't seem to be the datasheet on the web.
>>
>> Do any of you have a Toshiba Databook from the late 70s? Or does anyone
>> have an idea how I could solve the problem in a simple way without having
>> to make a new board (it is clear that I could also put a buffer in front of
>> the IG00153).
>>
>>
>> Best regards
>>
>> Florian
>>
>> -- http://www.florian-anwander.de/
>>
>> ________________________________________________________
>> This is the Synth-diy mailing list
>> Submit email to: Synth-diy at synth-diy.org
>> View archive at: https://synth-diy.org/pipermail/synth-diy/
>> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
>> Selling or trading? Use marketplace at synth-diy.org
>>
>
>
>________________________________________________________
>This is the Synth-diy mailing list
>Submit email to: Synth-diy at synth-diy.org
>View archive at: https://synth-diy.org/pipermail/synth-diy/
>Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
>Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20250104/b1f46272/attachment.htm>