[sdiy] Hot Air Rework Heat Gun with no base.. Only handpiece.. Any suggestions ?

[Roman Sowa]

I have something even cheaper from Aliex, with controll part as separate 
brick, like small laptop power adapter. There was only one time I really 
needed that, when replacing QFN44 chip and it indeed worked very wall on 
that task. Most of the time I use it to shrink heatshrink tubes.

Roman

W dniu 2025-02-26 o 18:21, Jean-Pierre Desrochers via Synth-diy pisze:
> I want to buy a small Hot Air Rework Heat Gun.
> 
> (to desolder and remove small smd parts)
> 
> I only want a Heat gun that all fits on a handpiece.
> 
> No Rework base station ..
> 
> What I found that looks like what I’m looking for would be this :
> 
> https://www.amazon.ca/LRT-8018A-Rework-Station-Desoldering/dp/B0BK9DHTJH 
> <https://www.amazon.ca/LRT-8018A-Rework-Station-Desoldering/dp/B0BK9DHTJH>
> 
> At $48.18CAD  it seems cheap and could be long term not reliable..
> 
> *Any suggestions for a good one (< $200) ?*
> 
> Again no Rework base station ,  only a handpiece with replacable nozzles.
> 
> Thanks.
> 
> 
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org