[sdiy] Hot Air Rework Heat Gun with no base.. Only handpiece.. Any suggestions ?

[Vladimir Pantelic]

On 27.02.25 00:37, brianw wrote:
> I've never used one of these. How do you prevent the hot air hear gun from blowing away parts nearby the one you intend to remove?

a) surface tension of the solder

b) don't run the fan at liftoff speeds

> I have a soldering station that accepts a pencil or tweezers. With the tweezers, I can apply heat directly to the part that I want to remove, and nothing else. There are several attachments, making removal of an 8-pin SOIC easy, and I've even managed to remove a 14-pin SOIC by moving the tool to melt the solder on the pins just beyond the tools edges.

works until that SOIC8 has a thermal pad underneath


> The Weller soldering tweezers and station are not super cheap, but the results are very precise.
> 
> Brian
> 
> On Feb 26, 2025, at 11:27 AM, Jean-Pierre Desrochers wrote:
>> So... I guess I'd better buy a complete Rework base station ..
>>
>>> -----Message d'origine-----
>>> De : Vladimir Pantelic via Synth-diy
>>> Envoyé : 26 février 2025 12:36
>>> Any suggestions ?
>>>
>>> that is the same handpiece/heat element that is on cheap chinese hot air
>>> stations, with the addition of the thermostat added on the end, so
>>> performance wise it should be the same.
>>>
>>> for $48 long term reliability would be the least of my concerns...
>>>
>>>
>>> On 26.02.25 18:21, Jean-Pierre Desrochers via Synth-diy wrote:
>>>> I want to buy a small Hot Air Rework Heat Gun.
>>>>
>>>> (to desolder and remove small smd parts)
>>>>
>>>> I only want a Heat gun that all fits on a handpiece.
>>>>
>>>> No Rework base station ..
>>>>
>>>> What I found that looks like what I’m looking for would be this :
>>>>
>>>> https://www.amazon.ca/LRT-8018A-Rework-Station-Desoldering/dp/B0BK9DHT
>>>> JH
>>>> <https://www.amazon.ca/LRT-8018A-Rework-Station-Desoldering/dp/B0BK9DH
>>>> TJH>
>>>>
>>>> At $48.18CAD  it seems cheap and could be long term not reliable..
>>>>
>>>> *Any suggestions for a good one (< $200) ?*
>>>>
>>>> Again no Rework base station ,  only a handpiece with replacable nozzles.
>>>>
>>>> Thanks.
> 
> 
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org