[sdiy] Hot Air Rework Heat Gun with no base.. Only handpiece.. Any suggestions ?

[cheater cheater]

strongly suggest against handpiece hot air. they suck bad. get an
atten with a base.

if you want something tiny for smd rework, get one of those little hot
plates. i think ladyada sells em.

On Wed, Feb 26, 2025 at 6:26 PM Jean-Pierre Desrochers via Synth-diy
<synth-diy at synth-diy.org> wrote:
>
> I want to buy a small Hot Air Rework Heat Gun.
>
> (to desolder and remove small smd parts)
>
> I only want a Heat gun that all fits on a handpiece.
>
> No Rework base station ..
>
>
>
> What I found that looks like what I’m looking for would be this :
>
> https://www.amazon.ca/LRT-8018A-Rework-Station-Desoldering/dp/B0BK9DHTJH
>
>
>
> At $48.18CAD  it seems cheap and could be long term not reliable..
>
>
>
> Any suggestions for a good one (< $200) ?
>
>
>
> Again no Rework base station ,  only a handpiece with replacable nozzles.
>
>
>
> Thanks.
>
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org