[sdiy] chassis punch

[peter foti]

The closest size that Greenlee makes is 11mm x 22mm, item # 60025

On Fri, Apr 18, 2025, 9:29 AM mark verbos via Synth-diy <
synth-diy at synth-diy.org> wrote:

> Hi all,
>
> I have a chassis punch, the kind where there’s a bolt that you crank down
> on, that’s the size of an IEC power connector inlet that has served me very
> well over the years. I would like to be able to install the mini C8 type
> power connectors on some gear that I am modifying to have a detachable
> power cable or internal power supply. For that I need a hole that is 25mm x
> 12mm (maybe 12.5mm) rectangle. I have been unsuccessful finding one. Sure,
> I could drill 4 tiny holes and connect them with a Dremel, but the punch is
> sooooo much nicer. Is there some secret source for these that I need to
> know about? I believe someone on here recommended the ones I have now….
>
> Mark
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20250418/b29c20a8/attachment.htm>