[sdiy] MIDI commands to drive external clock steps..

[René Schmitz]

Apart from MIDI clock as others mentioned, also consider the option of 
using "irregular" pulses.
The simplest is to use Note-On / Note-Off and turn that into a Gate, 
which then clocks the sequencer.
Then you can lay out the steps and timings freely in the PC.


On 02.04.2025 22:58, Jean-Pierre Desrochers via Synth-diy wrote:
>
> But I’d also like to use it with external pulses coming from
>
> Some kind of ‘MIDI to clock pulse generator’..
>
> My question is, using a PC sequencer (like Cakewalk SONAR X3 Pro, or 
> any PC sequencer),
>
> What MIDI data should I use and read to get timing pulses ?
>
> There are many ‘clock related’ MIDI data available
> but I cannot find which one(s) to use..
>
> I’d like to have the choice of timings like whole, half, quarter, 8th, 
> 16th, etc..
>
> Thanks for your help..
>

Cheers,

  René

-- 
--
synth at schmitzbits.de
http://schmitzbits.de
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20250403/406a696d/attachment.htm>