[sdiy] Pro-One screws and jack nuts

[Tom Wiltshire]

It might, but it's their photo, not mine!

I might have *one* original end panel screw. I certainly don't have any original jack nuts.

> On 6 Oct 2024, at 19:26, Mike Bryant <mbryant at futurehorizons.com> wrote:
> 
> A tape measure in the picture might help
> From: Synth-diy <synth-diy-bounces at synth-diy.org> on behalf of Tom Wiltshire <tom at electricdruid.net>
> Sent: 06 October 2024 19:19
> To: Sean Ellis via Synth-diy <Synth-diy at synth-diy.org>
> Subject: [sdiy] Pro-One screws and jack nuts
>  
> Does anyone know what size the screws in the wooden end panels of the Sequential Pro-One are? Bonus points if you know what size the nuts for the back panel jacks are too!
> 
> I'm asking so I don't have to pay $15 + $15 shipping (+ taxes on $30 when it hits the EU border) from Wine Country Sequential. €40 for four screws and four nuts is just stupid prices, sorry.
> 
> https://sequentialcircuits.com/images/600_Pro1.screws.jpg <https://sequentialcircuits.com/images/600_Pro1.screws.jpg>
> 
> https://sequentialcircuits.com/prooneparts.html <https://sequentialcircuits.com/prooneparts.html>
> 
> Many thanks,
> Tom

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20241006/e022cccc/attachment.htm>