[sdiy] Adding reset clock to CD4520

[denshi]

im trying to add a reset to a CD4520 but running into an issue:

in the TKB serge uses a CD4520 to handle the vertical clock (cycling between four vertical rows of pots)
here is a relevant snippet of the schematic (as found on hyperreal)
i copy and pasted the clock input to use as the “vertical reset” and am sending that to an inverter to the bottom half reset - it works, but only once, and then not again until i power cycle. am i missing something simple here?


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20240621/c0447b1c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 1719007181137blob.jpg
Type: image/png
Size: 145753 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20240621/c0447b1c/attachment.png>