[sdiy] Yamaha CS30 repair
Didrik Madheden
nitro2k01 at gmail.com
Fri Jul 26 05:22:30 CEST 2024
I agree with the previous speakers.
Another more subtle perspective. You've replaced the diodes with schottkys.
The diode drop goes maybe from 1.6 V (10DC-1 typical drop according to
datasheet) to 0.5 V and the wasted power in the diodes is halved. Great.
What happens next? The rectified voltage is now on average ~1 V higher, and
the pass transistors in the 15V regulators have to drop slightly more
voltage to keep regulation which results in slightly more wasted test there
instead. (And also the pass resistors to be fair.) This is a pretty slight
effect and might not matter either way, but given the choice, dropping a
but more in the diodes instead of the transistors is probably preferable.
Replacing the diode pairs with discrete 1n400x is a fine choice.
/Didrik
On Thu, 25 Jul 2024, 19:19 Kevin Walsh via Synth-diy, <
synth-diy at synth-diy.org> wrote:
> Hi all,
> I have a Yamaha CS-30 in for repair that was dead on arrival. It only
> needed the dual diodes (D1 & D2) on the PSU replaced to get it working
> again.
> I got it working by using two pairs of 1N4001's:
>
> - One pair configured in common cathode
> - One pair configured in common anode
>
> Both secondary fuses were replaced with 1.6A fast blow fuses as per the
> service manual instructions. Given this, I figured any 2 or 3 amp diodes
> should work fine.
> Being such a nice synth, I'd prefer to have the best long-term solution.
> Should I replace them with Schottky diodes for their lower forward voltage
> drop and efficiency, or stick with regular silicon diodes and opt for a
> higher current rating?
> Any tips or recommendations for specific diode models would be most
> welcome.
> Thanks,
> Kevin.
>
>
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20240726/5bbb9b73/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Yamaha-CS-30-Service-Manual-PSU-lo.jpg
Type: image/jpeg
Size: 163632 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20240726/5bbb9b73/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Yamaha-CS-30-Service-Manual-PSU-lo.jpg
Type: image/jpeg
Size: 163632 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20240726/5bbb9b73/attachment-0001.jpg>
More information about the Synth-diy
mailing list