[sdiy] Ultrasonic cleaner advice

[Andy Lambert]

You all could be right about simple green, but in my experience, limited
time in the solution followed by a thorough rinse with distilled water
works quite well.

On Sun, Dec 29, 2024, 1:12 PM Mike Beauchamp <list at mikebeauchamp.com> wrote:

> On 2024-12-29 15:13, Michael E Caloroso via Synth-diy wrote:
> > Not a fan of Simple Green on anything.  It removes paint.
>
> Simple Green also burned my lungs when I used it diluted to clean my
> workshop floor once... had to air it out for days.
>
> I've never ultrasonic cleaned anything (always used water-soluble
> solder), and not sure what the OP is trying to clean. But just wondering
> if an ultrasonic machine would atomize any cleaning additives and create
> a health hazard?
>
> Mike
> ________________________________________________________
> This is the Synth-diy mailing list
> Submit email to: Synth-diy at synth-diy.org
> View archive at: https://synth-diy.org/pipermail/synth-diy/
> Check your settings at: https://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20241229/90d99cc9/attachment.htm>