[sdiy] Yamaha P50-m inner reverb effect low level issue..

Roman Sowa modular at go2.pl
Mon May 29 11:31:03 CEST 2023

While we're on the subject of recapping, here's what I usually find in 
synths serviced by "synth experts".
Feel free to laugh, but it is rather sad.


W dniu 2023-05-28 o 21:52, Gordonjcp pisze:
> On Sun, May 28, 2023 at 12:04:12PM -0400, Jean-Pierre Desrochers wrote:
>> I checked all the inner electrolytic's ESR values and they all have correct
>> values so.
> I feel I should point out that in 35 years of repairing electronic equipment, I've replaced maybe a dozen faulty electrolytics of which six were in the same EDP Gnat.
> This of course leaves out Amstrad SRD1000 and family satellite receivers, which I have rebuilt dozens of power supplies in, but I'm not counting cheap shitty SMPSUs.
> If you have a faulty synth, the fault is never, *ever* going to be "bad caps".
> I charge extra to look at anything that's ever been "re-capped" for a good reason.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: recapexpert.jpg
Type: image/jpeg
Size: 138326 bytes
Desc: not available
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20230529/d9c6e816/attachment.jpg>

More information about the Synth-diy mailing list