[sdiy] Yamaha P50-m inner reverb effect low level issue..

Jean-Pierre Desrochers jpdesroc at oricom.ca
Mon May 29 01:58:58 CEST 2023


So... your advice.. ?

> -----Message d'origine-----
> De : Synth-diy <synth-diy-bounces at synth-diy.org> De la part de Gordonjcp
> Envoyé : 28 mai 2023 15:52
> À : synth-diy at synth-diy.org
> Objet : Re: [sdiy] Yamaha P50-m inner reverb effect low level issue..
> 
> On Sun, May 28, 2023 at 12:04:12PM -0400, Jean-Pierre Desrochers wrote:
> >
> > I checked all the inner electrolytic's ESR values and they all have
> > correct values so.
> 
> I feel I should point out that in 35 years of repairing electronic
equipment, I've
> replaced maybe a dozen faulty electrolytics of which six were in the same
EDP
> Gnat.
> 
> This of course leaves out Amstrad SRD1000 and family satellite receivers,
> which I have rebuilt dozens of power supplies in, but I'm not counting
cheap
> shitty SMPSUs.
> 
> If you have a faulty synth, the fault is never, *ever* going to be "bad
caps".
> 
> I charge extra to look at anything that's ever been "re-capped" for a good
> reason.
> 
> --
> Gordonjcp
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org




More information about the Synth-diy mailing list