[sdiy] Yamaha P50-m inner reverb effect low level issue..

Gordonjcp gordonjcp at gjcp.net
Sun May 28 21:52:22 CEST 2023


On Sun, May 28, 2023 at 12:04:12PM -0400, Jean-Pierre Desrochers wrote:
> 
> I checked all the inner electrolytic's ESR values and they all have correct
> values so.

I feel I should point out that in 35 years of repairing electronic equipment, I've replaced maybe a dozen faulty electrolytics of which six were in the same EDP Gnat.

This of course leaves out Amstrad SRD1000 and family satellite receivers, which I have rebuilt dozens of power supplies in, but I'm not counting cheap shitty SMPSUs.

If you have a faulty synth, the fault is never, *ever* going to be "bad caps".

I charge extra to look at anything that's ever been "re-capped" for a good reason.

-- 
Gordonjcp


More information about the Synth-diy mailing list