[sdiy] Envelopes and gates from guitar

Mattias Rickardsson mr at analogue.org
Fri Jun 16 20:50:33 CEST 2023

NT <nathan at idmclassics.net> skrev:

> ...
> The External Signal Processor from the Korg MS-20 is a very useful circuit
> worth looking at, but IIRC requires at least one multigang pot that could
> be difficult to get, though may be available now due to Eurorack clones.

The solution with those two quad-ganged pots for Low Cut & High Cut would
be fairly easy to replace with a 2164-based solution these days.

That ESP is definitely marketed as a guitar thing. Not sure how good it is
for that, or if it's perhaps an optimistic design. :-)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20230616/f23d2820/attachment.htm>

More information about the Synth-diy mailing list